Custom polycarbonate windshields for low-speed EV, delivery and specialty vehicle OEMs
From early design review to prototype, tooling and repeat supply.
Your windshield design does not need to be final before the project can start.
For enclosed low-speed vehicles, the windshield often develops together with the cab.
The angle changes. A seal moves. A wiper is added. A radius that looked fine in CAD becomes more difficult once the first part is formed.
These are normal development issues.
PlsTect can join the project while those decisions are still open, helping OEM teams review the windshield geometry, surface requirements and manufacturing route before they become expensive to change.
The objective is not to wait for a perfect drawing.
It is to understand what is already fixed, what is still changing and what needs to be proven next.
The windshield should develop with the vehicle, not wait for the vehicle to stop changing.
Once a windshield becomes curved, integrated into an enclosed cab and responsible for a large part of the driver’s forward view, it is no longer just a transparent panel.
Its curvature affects forming.
Its edges meet seals and mounting structures.
Its finished surface may face outdoor exposure, frequent cleaning and wiper contact.
Those decisions are connected.
The earlier these questions are discussed, the more options remain open.
Design revisions are expected during OEM development. A revised drawing should be part of the same development path, not automatically the beginning of a new enquiry.
Fast response matters here.
When something changes, the useful answer is not simply another quotation. It is a clear view of what the change affects and what should happen next.
A prototype should do more than prove that polycarbonate can take the shape.It should help the OEM decide whether the windshield is ready to move forward.
A prototype can be used to check:

If the first sample exposes a problem, that is useful development information.
This is the right stage to adjust the geometry, mounting details, trimming or coating route.
Project-specific tooling can then be planned around a more mature part.
The tooling approach should reflect both the development stage and the expected production volume. A lower-volume specialty vehicle does not necessarily need the same tooling strategy as a high-volume passenger-car program.
| In the Tool | Curvature, local radii and shape transitions affect how the windshield forms. For coated polycarbonate, geometry also influences whether a thermoformable pre-coated route is appropriate or whether the part is better formed first and coated afterward. Not every windshield needs the same process. |
|---|---|
| In the Cab | The visible outline is only part of the geometry. Seal contact, mounting positions, edge clearances and the finished profile all affect whether the windshield installs consistently.A part can look correct in CAD and still create problems when it meets the real vehicle. |
| In the Driver's View | The driver looks through the finished curved surface. The main viewing area, forming quality and surface condition therefore need to be considered together.Dust, repeated cleaning, sunlight, rain and windshield-wiper contact may also influence the surface requirement.Hard coating can improve surface wear resistance, but hard-coated alone is not a complete windshield specification.The intended use still matters. |
A program can also move between the two routes.
Early development may begin with coated sheet or forming trials. Later, as the geometry and volume become clearer, the project may move toward formed-part supply.
Different OEMs want to keep different parts of the manufacturing process in-house,while at PlsTect,we support both routes.
For manufacturers that already control forming or downstream fabrication.
Material and coating can be selected around the intended windshield geometry, thickness, forming conditions and surface requirements rather than treated as an isolated sheet purchase.
This route can support both development trials and recurring material supply.
For OEMs that want the supply scope to move further toward vehicle assembly.
Depending on the agreed specification, the project may include forming, trimming, holes, slots, edge features and other defined fabrication requirements.
The component is developed around the vehicle project rather than selected from a standard windshield catalogue.
A prototype proves the concept.
An approved reference creates the part.
Once the windshield is accepted, the project needs a clear production reference.
That may include the agreed geometry, material, coating route, trimming and machining details, surface expectations and an approved drawing or sample.
From there, the project can move through:
An initial batch can help confirm that the windshield also works when parts are produced and installed repeatedly.
Expected production volume may influence tooling, manufacturing and supply planning.
If the vehicle changes later, the windshield reference should change with it. Drawing revisions, tooling status and approved samples need to remain connected to the same program.
Packaging and surface protection can also be defined as part of the delivery requirement.
Our goal is not to make one successful windshield. It is to establish a windshield the OEM can order again.
You do not need a complete production specification before contacting PlsTect.
If the project is still changing, tell us what is already fixed and what is still open.
That is enough to begin a useful discussion.
Yes.
Early project review can help identify forming, coating, tooling and vehicle-integration issues while the design still has room to change.
A final production drawing is not required for the first discussion.
Yes.
Prototype windshields can be used to review geometry, vehicle fit, viewing area, mounting details, surface condition and the proposed production route before repeat supply begins.
The appropriate prototype route depends on the project.
Yes.
The tooling approach depends on windshield geometry, project maturity, prototype objectives and expected production volume.
The part should be reviewed before production tooling is committed.
Yes.
Customers with their own forming capability can source functional coated polycarbonate sheet with necessary technical support around the intended application and process.
OEMs requiring a more complete component can develop the project toward custom-formed windshield supply.
No.
Suitability depends on material thickness, curvature, local strain, forming conditions, coating system and the required finished appearance.
Where a pre-coated forming route is not appropriate, another forming and coating sequence may be considered.
Vehicle and glazing requirements depend on the target market, vehicle classification and application.
PlsTect does not present every custom windshield as universally road compliant.
Where specific regulations or approval requirements apply, they should be identified early so the project can be developed and validated against the relevant requirements.
A developing vehicle does not need a windshield supplier who only becomes useful after every drawing is frozen.
It needs a development route that can move from design review to prototype, tooling and repeat supply without losing sight of the vehicle itself.
Whether the project starts with functional coated sheet or a custom-formed windshield, start with where the vehicle is today.
Share your drawing or sample together, PlsTect will prepare the next step toward specification and quotation within 24hours.
PlsTect supplies plastic, film and glass materials with functional surface treatments and fabrication support for OEM and industrial applications.
From sheets and films to panels, covers, windows and finished components, we help move material requirements toward production-ready parts.
Engineering response within 24 hours
© 2026 PlsTect. All Rights Reserved. Privacy Policy